Why this blog?
Until this moment I have been forced to listen while media and politicians alike have told me "what Canadians think". In all that time they never once asked.
This is just the voice of an ordinary Canadian yelling back at the radio -
"You don't speak for me."
email Kate
Goes to a private
mailserver in Europe.
I can't answer or use every tip, but all are appreciated!
Katewerk Art
Support SDA
Paypal:
Etransfers:
katewerk(at)sasktel.net
Not a registered charity.
I cannot issue tax receipts
Favourites/Resources
Instapundit
The Federalist
Powerline Blog
Babylon Bee
American Thinker
Legal Insurrection
Mark Steyn
American Greatness
Google Newspaper Archive
Pipeline Online
David Thompson
Podcasts
Dark Horse
Michael Malice
Timcast
@Social
@Andy Ngo
@Cernovich
@Jack Posobeic
@IanMilesCheong
@AlinaChan
@YuriDeigin
@GlenGreenwald
@MattTaibbi
Support Our Advertisers

Labour Day

In The Shadow
Of The Winds

Don't Run

Polar Bear Evolution

Email the Author
Wind Rain Temp
Seismic Map
What They Say About SDA
"Smalldeadanimals doesn't speak for the people of Saskatchewan" - Former Sask Premier Lorne Calvert
"I got so much traffic after your post my web host asked me to buy a larger traffic allowance." - Dr.Ross McKitrick
Holy hell, woman. When you send someone traffic, you send someone TRAFFIC.My hosting provider thought I was being DDoSed. - Sean McCormick
"The New York Times link to me yesterday [...] generated one-fifth of the traffic I normally get from a link from Small Dead Animals." - Kathy Shaidle
"You may be a nasty right winger, but you're not nasty all the time!" - Warren Kinsella
"Go back to collecting your welfare livelihood." - Michael E. Zilkowsky
What no warning cones or flares?
What’s to worry, the tire has a rock under it.
shouldn’t he wear an helmet , where is his mom with the bubble wrap .
Hey, a guy’s gotta be comfortable when he’s welding. Whaddya expect, he’s gonna lie on his back?
Should read Holland and Merkel.
Yeah, he’s gotta’ be comfy while he’s welding, and besides, when it’s tipped up like that it’s easier to weld that patch onto the gas tank.
… Sigh! So very many safety violations that it’s hard to count ’em up. But it brings back memories of similar or even worse practices I’ve witnessed (Saudi Arabia, and Korea, for example)
The Illegal Mexican repair service in Phoenix, Arizona, they do good cheap work… No overhead.. You pay for the Parts as they are delivered and they charge just for the Labor….CASH
ha! that pic comes-up every year in our saftey refresher for work.
Under Darwin’s law, this is perfectly acceptable. I envy their ability to play with real lawn darts and ride their bikes without those stupid helmets. People are in good supply and taking responsibility for their own safety weeds out the stupid, requiring far less bureaucracy and government nannies. Only question I have, is where’s the devise that brought the truck to that angle and why isn’t it still attached ? My guess is 4 or 5 friends that helped lift and then left for shadier places. I guess they’ll be back if he screams loud enough. He’s welding but since he’s not moving the welder under the truck as a safety measure it shows that the welder is more valuable than the life or the truck. A couple more 2×6 wouldn’t hurt either. I’m sure it all went well and he could probably get away with that for years, or until Darwin’s law kicked in. He’s single I hope.
no taillights, definitely a $250 fine, or small bribe to policia
To be frank… this is the best use of politicians I’ve yet seen.
Stop calling me Frank.
Is it a worker who charges a flat rate or Justin tweaking his campaign platform?
What could possibly go wrong with a French and German ‘team’?
Canadian Tire, corner of Adelaide and Yonge st in Toronto, circa 2035.
Whats the worst that could happen? It would land on all 4 tires. If there was no tires on it then i would be a bit worried!!
Moe,Larry & Curley and their improvised car jack
http://www.payitbackndp.ca/
Moore has a new video on CO2
https://youtu.be/WDWEjSDYfxc
Good one.
CT beat me to the comment right out of the gate.
So, I will say that I think people here are being just a little judgemental. After all, we don’t know how many sticks he used on the other side.
Thanks Paul, signed. A real good ‘kick in the ass’ video.
I can remember when we did this on the farm.
So much symbolism if one were to look. This is Trudeau’s campaign bus, with Trudeau’s shaky platform planks holding up the ride, ready to snap into smithereens and crush the “welder”. The red box thing in the background is Gerald Butts, faithful driod that he is.
But you aren’t Frank
Is that premier Wynne under the truck welding up the Ontario economy?
Where’s Stanley , did he go off to borrow a jack from Mack Sennett?
Operational requirements dictate the means…
If he is the guy who lifted the truck while propping it up with ladders……..I’m not too worried for him.
Caption … Why women live longer.
It is all in the planning….in perfect position when the shtf to kiss his ass goodbye.
Some of my friends who winter in Arizona have told me that after backing into a utility pole with a motor home, they called in a Mexican ”body shop on wheels.” An old F-350 with all the tools in a van body. It took him all of an hour, to pull the dent, apply filler and paint the damage. Cost?? $75.00 US ”cash.”
At the same time, I took my F-150 to a body shop here in Sask. to have a gravel chip repaired. (SGI Auto-Pak.) When I got in the truck, I thought the chip looked rather ”pronounced” but what the hell. A week later I showed it to a guy at Speedy Auto Glass. He informed me that the chip had not been touched. You do thinks legal, and look at what can happen??
Re: Pickup in photo.
How do you know that the box isn’t filled with bowling balls??
Its justa quick fix, his friends should have stayed and held the truck up ,then eased it down when he finished